歡迎進入蘇州德計儀器儀表有限公司網站! 固話:0512-68790450 手機:13915418480 返回首頁 | 聯系我們
        大家都在搜: 固緯安規測試儀,固緯耐壓測試儀,固緯LCR測試儀
        產品中心/ product center 您的位置:網站首頁 > 產品中心 > > 耐壓測試儀,安規測試儀 > 7160精密型 耐壓/絕緣測試儀
        精密型 耐壓/絕緣測試儀

        精密型 耐壓/絕緣測試儀

        產品型號: 7160

        所屬分類:耐壓測試儀,安規測試儀

        產品時間:2024-05-06

        簡要描述:7160實用型耐壓絕緣測試儀,耐壓AC:5KVAC/12mA,耐壓DC:6KVDC/5mA

        詳細說明:

        7160實用型耐壓絕緣測試儀,耐壓AC:5KVAC/12mA,耐壓DC:6KVDC/5mA

        7100 系列實用型耐壓絕緣測試儀,7151、7152、7160、7162;四種測試順序可供選擇:W, I, W-I, I-W (Only 7152 , 7162) 體積小 (28寬 × 8.9高 × 30深 cm) 、重量輕 8.4kg
        四種測試順序可供選擇:W, I, W-I, I-W (Only 7152 , 7162)
        可與華儀的接地阻抗測試儀7305連結使用
        內建10組程序內存
        緩升及測試時間可達999.9秒
        鍵盤鎖定功能
        內建PLC Remote可程序遙控界面
        前面板軟件輸入校正
        操作簡單

        MODEL 7151 7152 7160 7162
        AC WITHSTAND VOLTAGE
        Output Rating
        5KVAC/12mA
         
        Range
        Resolution
        Accuracy
        Output Voltage, KVAC
        0-5.00
        0.01
        ±(2% of setting + 5V)
        Output Frequency 50Hz/60Hz ±100ppm, User Selection
        Output Waveform Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5
        Output Regulation ± (1% of output + 5V), From no load to full load
        SETTINGS
        Hi-Limit AC Current, mA
        0.10 - 12.00
        0.01
        ±(2% of setting + 2counts)
        Lo-Limit AC Current, mA
        0.00 - 12.00
        0.01
        ±(2% of setting + 2counts)
        Ramp Time, second
        0.1 - 999.9
        0.1
        ±(0.1% + 0.05sec)
        Dwell Time, second
        0, 0.2 - 999.9
        (0=continuous)
        0.1
        Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
        DC WITHSTAND VOLTAGE (7160,7162 ONLY)
        Output Rating
        6KVDC/5mA
        Output Voltage, KVDC
        0 - 6.00
        0.01
        ±(2% of setting + 5V)
        Output Ripple <5%(6KV/5mA at Resistive Load)
        SETTINGS
        Hi-Limit DC Current, mA
        0.02 - 5.00
        0.01
        ±(2% of setting + 2counts)
        Lo-Limit DC Current, mA
        0.00 - 5.00
        0.01
        ±(2% of setting + 2counts)
        Ramp Time, second
        0.1 - 999.9
        0.1
        ±(0.1% + 0.05sec)
        Dwell Time, second
        0, 0.2 - 999.9
        (0=continuous)
        0.1
        Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
        Discharge Time < 200 msec
        INSULATION RESISTANCE (7152,7162 ONLY)
        Output Rating
        1KVDC/1000MΩ
        Output Voltage, KVDC
        0.10 - 1.00
        0.01
        ±(2% of setting + 3V)
        SETTINGS
        Hi-Limit Resistance, MΩ
        0, 1 - 1000 (0=OFF)
        1
        ±(3% of setting+2counts)at > 500VDC
        Lo-Limit Resistance, MΩ
        1 - 1000
        1
        ±(7% of setting +2counts)at <500VDC
        Delay Time, second
        0, 0.5 - 999.9
        (0=continuous)
        0.1
        ±(0.1% + 0.05sec)
        MEASUREMENT
        AC/DC Voltage, KV
        0 - 6.00
        0.01
        ±(1.5% of reading + 1count)
        DC Voltage, KV (IR only)
        0.10 - 1.00
        0.01
        ±(1.5% of reading + 3V)
        AC Current, mA
        0.10 - 12.00
        0.01
        ±(2% of reading + 2counts)
        DC Current, mA
        0.02 - 5.00
        0.01
        ±(2% of reading + 2counts)
        Resistance, MΩ
        1 - 1000
        (Auto Range)
        0.001
        0.01
        0.1
        ±(3% of reading+2counts)at > 500VDC
        ±(7% of reading +2counts)at <500VDC
        GENERAL
        Input Voltage AC 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A Fast
        PLC Remote Control Input : Test , Reset
        Output : Pass , Fail , Processing
        Memory 10 Sets Store/Recall of each Memory, 4 Test Mode Selectable (W, I, W~I, I~W Only 7152, 7162)
        Display 16×2 LCD with back light
        Key Lock To prevent unauthorized alteration of the test Parameters
        Calibration Build-in software and external calibrated meters
        Environment 0-40℃, 20-80%RH
        Dimension/Net Weight 280mm(W)×89mm(H)×300mm(D)/ 8.4Kg
        STANDARD ACCESSORIES
        Power Cord(10A)
        ×1
        Fuses
        ×3 (Including a spare contained in the fuse holder)
        Hipot Test Lead ,1.5m(1101)
        ×1
        Hipot Return Lead ,1.8m(1102)
        ×1
        *product specifications are subject to change without notice.


        7160耐壓測試儀,蘇州德計儀器華儀全系列產品銷售,請致電銷售部門 : ,品牌廠家:華儀,中國臺灣華儀,中國臺灣華鈦,華儀電子股份有限公司;銷售:代理商 經銷商;價格:*銷售 * 報價 特惠價 批發價 庫存;使用方法:原理技術參數 選型 說明書 銷售網絡:蘇州 昆山 常熟 太倉 張家港 吳江 常州 南京 無錫 南通 上海 杭州 寧波 嘉興 武漢 成都 西安 北京 深圳 廣州 惠州東莞 廈門 福州 貴陽 昆明 長沙 南寧 鄭州 哈爾濱 長春 沈陽 天津 石家莊 合肥;7160耐壓測試儀



        留言框

        • 產品:

        • 您的單位:

        • 您的姓名:

        • 聯系電話:

        • 常用郵箱:

        • 省份:

        • 詳細地址:

        • 補充說明:

        • 驗證碼:

          請輸入計算結果(填寫阿拉伯數字),如:三加四=7

        在線客服 二維碼

        掃一掃,關注我們